Home > Products > Magnetic Equipment > Magnetic Separator

Magnetic Separator

[Introduction]: A wet permanent magnetic separator for separating strong magnetic minerals

[Capacity]: 8-240t/h

[Improvement]: Magnetic system materials adopt ferrite and NdFeB with high performance, high coercive force and high remanence; the surface of the cylinder is lined with Xinhai wear-resistant rubber.

Get Quote

Online Inquiry

Leave Message

Send Email

ADVANTAGES

Magnetic system is compounded of ferrite and permanent magnets; the average magnetic induction intensity of cylinder surface is 100～600mT
The same cylinder can be equipped with three types of tank adapting to different dressing process.
Small area taken, good separation for magnetic mineral, reduce the load of next process
Please wait patiently in case the slow loading speed, for Xinhai 3D model must let you have a more intuitive understanding of our product.
Permanent magnetic drum separators have 3 kinds including downstream type, counter flow type and semi- counter flow type according to the difference of base structure.
Downstream type permanent magnetic drum separator: slurry flows in the same direction with drum
Counter flow type permanent magnetic drum separator: slurry flows over against drum, which create great conditions for cleaning of non magnetic ores. The non magnetic ores approach the clean surface of drum and the magnetic ores can be absorbed in the strongest magnetic field.
semi-counter flow type permanent magnetic drum separator: slurry is fed into cavity from the bottom of drum, and the magnetic ores fall into concentrate tank after reaching a certain height, while the non magnetic ores will enter into tailings tank along with slurry in the opposite direction with drum.

TECHNICAL PARAMETERS

Model & Spec.	CTBY1018	CTBY1024	CTBY1030	CTBY1218	CTBY1224	CTBY1230
Diameter of Cylinder (mm)	1000	1000	1000	1200	1200	1200
Length of Cylinder (mm)	1800	2400	3000	1800	2400	3000
Surface Magnetic Density (mt)	350~550	350~550	350~550	350~550	350~550	350~550
Rotating Speed of Cylinder (r/min)	23	23	23	20	20	20
Capacity of Dry Ore (t/h)	42 ~65	53 ~86	82~124	58 ~97	71~120	103~158
Feed Size (mm)	0~10	0~10	0~10	0~10	0~10	0~10
Slurry Density (%)	20 ~50	20 ~50	20 ~50	20 ~50	20 ~50	20 ~50
Motor Power (kW)	5.5	7.5	7.5	7.5	11	11
Total Weight (t)	5.2	6.4	7.1	6.7	7.2	8.9
Equipment Length (mm)	3160	3790	4460	3380	4190	4770
Equipment Width (mm)	2250	2250	2250	2460	2460	2460
Equipment Height (mm)	1750	1750	1750	2000	2000	2000